Loxeal Engineering Adhesives and Sealants


Go to content

Acrylic Adhesives

Products

30-55 +ATT.20

Loxeal 30-55 is a structural acrylic adhesive to be used with its specific Loxeal Activator, designed primarily for bonding metal to metal, ferrite, ceramics and some thermoplastics. This adhesive may be used in a variety of structural bonding applications due to its versatile capabilities. Structural adhesive 30-55 provides high tensile strength while maintaining excellent product flexibility; this results in tough and durable bonds with outstanding impact and peeling resistance. Curing is effected in few minutes at room temperature.

33-00 +ATT.20

2-component no-mixing fast curing structural adhesive to be used with its specific Loxeal Activator for bondng metals, plastics, ceramics, woods. No-mixing required, apply Adhesive on one part and Activator on the other, assemble and press parts; fixing is achieved within few minutes. It provides high impact resistance, good peeling and tensile strength, best resistance against gasoline, lubricants, water, heat resistant up to 120C.

33-47 A+B

Two-components adhesive curing by contact, does not require mixing. Fixture time from 1 to 3 minutes. Suitable for bonding metals, ceramics, glass, wood, hard plastics; it is highly resistant to impact, peeling and tensile. 33-47A may be used also with Loxeal Activators 18 and 20.

3362

Two-components toughened low viscosity and low odor acrylic adhesive. Mixing ratio 1:1. Specifically designed for bonding plastics, it provides good adhesion to metals, ceramics, fiberglass, wood and their combinations too. Fast curing at room temperature, it provides high shear and peeling strength.

3439

Loxeal 3439 is a fluid, 2-component no- mixing fast curing structural adhesive to be used with its specific Loxeal Activator. It bonds ferrites, metals, ceramics. Typical fixture times 20-40 seconds. Toughened, it achieves in very few minutes good shear and impact strengths. Ideal for high speed assembly production lines. Acid free.

3452

Two-components toughened low viscosity and low odor acrylic adhesive. Mixing ratio 1:1. Suitable for bonding metals, ceramics, GRP, wood, hard plastics. Fast curing at room temperature, it provides high shear and peeling strength.

3459

Loxeal 3459 is a 2-component no- mixing fast curing structural adhesive to be used with its specific Loxeal Activator. It bonds ferrites, metals, ceramics. Typical fixture times 20-40 seconds. Gel formulated, toughened, it achieves in very few minutes good shear and impact strengths. Ideal for high speed assembly production lines. Acid free.

3460

Two-components fast curing acrylic adhesive, specifically designed for bonding PP, PE, HDPE, LDPE, Polyolefins, copolymers, PTFE, EPDM among them and in combination with other plastics such as ABS and PVC and to metals (aluminium) as well. Does not require any surface treatment. Mixing ratio 1:1. Micro-particles for gap control; fast curing at room temperature, it provides high shear and peeling strength.

3461

Two-components medium speed curing acrylic adhesive, specifically designed for bonding PP, PE, HDPE, LDPE, Polyolefins,copolymers, PTFE, EPDM among them and in combination with other plastics such as ABS and PVC and to metals (aluminium) as well. Does not require any surface treatment. Mixing ratio 1:1. Micro-particles for gap control; it provides high shear and peeling strength.


Back to content | Back to main menu