Loxeal Engineering Adhesives and Sealants


Go to content

Dosing Systems

Products

DIFFERENT DISPENSING SYSTEMS AVAILABLE TO FUFLILL CUSTOMERS APPLICATIONS.

DE1 Electro Pneumatic Dosing Unit

DE1

Electro Pneumatic Dosing Unit (time-pressure) for anaerobic and cyanoacrylate adhesives. Including control unit, reservoir (with empty level sensor), valve, dosing nozzle, actuated by foot switch or metal part sensor.
Suitable for PLC connections, equipped with end cycle alarm sensor. Tubing is made by PE and PTFE flexible hoses.

Technical specification

Dimension

L490 x P390 x H250

Weight

Kg. 8

Power supply

230 V - 50 Hz

Max power

75 W

Pressure rate

from 4 to 8 bar

Dosing pressure adjustment

from 0,1 to 5 bar

Reservoir capacity

2,3 liters

Dosing quantity

da 0,03 ml to continuous trace

Dosing time

0,05" to continuous

DE3 - DE3M Pneumatic Dosing Unit

DE3- DE3M

Pneumatic Dosing Unit for manual dispensing of anaerobic and cyanoacrylate adhesives. Equipped with foot switch or hand actuated dispensing valve. Does not require electrical power supply and is suitable for use in spark proof / flame proof environments.

Technical specification

Dimension

L245 x P390 x H390

Weight

Kg. 3,5

Pressure rate

from 4 to 8 bar

Dosing pressure adjustment

from 0,1 to 5 bar

Reservoir capacity

2,3 litres

Dosing quantity

manual

DE4E Syringe Dosing Unit

DE4E

Versatile Electro Pneumatic Dosing Unit suitable for low and high viscosity adhesives and lubricants. Dosing is effected by syringe acting as reservoir for products, may dispense even micro drops. A vacuum suction system avoid dripping from the dosing syringe.

Technical specification

Dimension

L300 x P190 x H80

Weight

Kg. 2

Power supply

230 V - 50 Hz

Max power

50 W

Dosing pressure adjustment

from 0,1 to 5 bar

Syringes capacity

10 - 35 cc

Dosing quantity

0,001 cc to continuous trace

Dosing time

0,02" to continuous


Back to content | Back to main menu