Loxeal Engineering Adhesives and Sealants


Go to content

Gasketing

Products

Guarnizioni

USE
Gasketing anaerobic adhesive seals flat mating surfaces and joins flanges on pumps,
gearboxes and differential housings. It replaces preformed gaskets and allows contact
between metal parts forming a seal which is not prone to creep or relaxation.
Formas a flexible and / or elastic gasket which is resistant to vibration, heat, oil and other
industrial fluids. Parts can be disassembled using normal tools.


TECHNICAL INFORMATION

Guarnizioni

LIQUID GASKETING

28-10

Anaerobic curing adhesive for the gasketing and sealing of flanges. It replaces solid gaskets and gives elastic cured films. To seal against gases, water, LPG, hydrocarbons, oils and other chemicals. Thixotropic property prevents sealant migration before or during curing. Shocks and vibrations resistant; unaffected sealing properties in the temperature range from -55C to +150C.

58-14

Anaerobic curing adhesive for the gasketing and sealing of flanges. It replaces solid gaskets and gives flexible cured films. To seal against gases, water, LPG, hydrocarbons, oils and other chemicals. Thixotropic property prevents migration of the sealant before or during curing. Shocks and vibrations resistant; unaffected sealing properties in the temperature range from -55C to +150C.

58-31

Anaerobic curing adhesive for the gasketing and sealing of flanges. It replaces solid gaskets and gives flexible cured films. To seal against gases, water, LPG, hydrocarbons, oils and other chemicals. Thixotropic property prevents migration of the sealant before or during curing. Shocks and vibrations resistant; unaffected sealing properties in the temperature range from -55C to +180C.

59-10

Loxeal 59-10 is a single component, medium strength anaerobic sealant with good heat resistance. The product cures at ambient temperature when confined in the absence of air between close fitting metal surfaces. For sealing of flat mating rigid flange joints of pumps, gearboxes, camshafts blocks, motor flanges. To replace pre-formed gaskets, allows greater machining tolerances, assures metal to metal contacting and dismantling with normal tools. Highly resistant to vibrations, heat, water, gases, LPG, oils, hydrocarbons and many chemicals.

ELASTOMERIC & PLASTIC GASKET

59-20

One component moisture curing silicone based sealant and adhesive releasing non corrosive and low-odour by products. Provides an extremely flexible gasket between surfaces made of various materials (metal, plastics, glass, ceramics). Suitable for sealing gear boxes, pumps and motors flanges, oil and water containers, air forced pipes. Resistant to vibrations, thermal shocks, pressurized air, water, oils and several chemicals.
Keeps its sealing properties within temperatures of - 50C and + 180C. Sealed parts can be disassembled using normal tools.

59-30

One component moisture curing acetic silicone sealant by reaction. Suitable for sealing gear boxes, pumps, motors and compressors flanges, hot fluid pipes. Provides an extremely flexible gasket between surfaces and resists to vibrations, thermal shocks, water, gas, LPG, oils and several chemicals. Keeps its sealing properties within temperatures of - 60 and + 250C with peaks up to 300 C. Sealed parts can be disassembled using normal tools.

59-40

One component sealing adhesive based on MS polymers. Its odourless, neutral and free of isocyanates. It cures with moisture producing a tough gum-like seal. Useful to seal glass structures and surfaces, glaze, glazed metal panels, epoxy, polystyrene foam, PVC, steel, anodised aluminium and machined wood. Not suitable for PE, PP, PTFE, bituminous surfaces applications, for underwater application and expansion joints. Not to be painted with alkyl resin colours.

08-07

Tixotropic permanent plastic sealant for use on threaded and flanged joints. It does not not harden in time and joints can be easily dismounted.
Seals against gas, LPG, water, gasoline, oils. Can be used in combination with preformed gaskets or alone for gap joints less than 0,1 mm. Resistant to vibrations, thermal shocks, keeps sealing properties within a temperature range of 50 / + 120C. Prevents from surfaces corrosion.
Approved by Volkswagen for use in motor parts assembly (Ref. AKD 454300).

104N

Solvent based rubber composition. For sealing flange joints of pumps, gearboxes, motor flanges and threaded pipes joints. Replaces preformed gaskets and PTFE tapes. Forms an elastic film highly resistant to gasoline, fuels, oils, natural gas and LP gas, industrial fuids, vibration, ageing and temperature up to +120C. Permits disassembly of assembled parts after years.


Back to content | Back to main menu